Calender Worm Gear Reducer
Machine-specific worm gear reductions for rubber calender drives where compact installation or right-angle output is required.
A worm and worm-wheel gear train is one possible way to achieve compact speed reduction in a calender drive, particularly at a right-angle shaft arrangement. It is not interchangeable with a conventional helical calender gearbox. Continuous torque, ratio, efficiency, lubrication and heat dissipation must be assessed for the actual roll load and operation duration.

Where This Gearbox Is Used
Series and Gearbox Configuration
Relevant product family: Worm and worm-wheel reductions for calender applications. Actual model, housing size, ratio and rated output torque are confirmed from the machine duty and supplier’s final selection drawing.
Calender worm reduction units
Application-specific worm-wheel and worm-shaft selection after speed, load and thermal duty review.
Custom housing and output interface
Machined housing, bearing, shaft and installation interfaces reviewed from an existing gearbox drawing.
SCW Calender Worm Reducer Reference Sizes
The industrial transmission catalogue lists SCW160, SCW200, SCW250 and SCW320 as calender worm-gear reducer size references. Worm drive selection requires separate checking of transmitted torque and thermal capacity because power losses depend on ratio, speed, lubrication and operating duty.
| Series | Reference models | Engineering checks |
|---|---|---|
| SCW | 160 / 200 / 250 / 320 | Input/output RPM, motor power, nominal and start-up torque, mounting arrangement, shaft hand, oil temperature and cooling |
The size designation alone is not evidence that a specific reducer has enough output torque or acceptable continuous-duty thermal rating. Final data must be validated for the exact SCW variant.
Technical Selection: Power, Speed, Ratio and Torque
These are quotation and selection inputs—not a combined guaranteed rating range for every gearbox. Input motor power (kW), ratio (i), input speed (rpm) and output torque (N·m) must all be checked against the specific machine and duty.
| Technical parameter | Selection basis | RFQ / engineering notes |
|---|---|---|
| Input power (kW) | Design selection by motor rating and duty | Check permissible thermal capacity of worm drive. |
| Reduction ratio | Required roll RPM relative to input RPM | Single or compound reduction must be confirmed per application. |
| Output torque (N·m) | Based on roll force and machine duty | Worm efficiency losses and starting peaks affect sizing. |
| Mounting and shaft angles | Right-angle or configured output layout | Output centerline and hand of worm need to be established. |
| Lubrication/thermal | Oil grade, temperature and cooling as required | Thermal selection is important for continuous-use worm units. |
Important: Confirm operating and peak loads, orientation, lubrication, ambient conditions and interface drawings before finalizing rated values. No generic figures have been copied from another gearbox series.
Custom Design and Existing Gearbox Replacement
Please provide the calender model, number of driven rolls, motor power and speed, target roll RPM, required ratio, operating hours, duty cycle, existing worm-shaft orientation, gearbox outline and mounting drawing. For continuous operation, worm gear efficiency, lubrication, heat rejection and permissible oil temperature must be checked; self-locking must not be assumed. A dimensional replacement can be assessed where the original unit is obsolete.
KNGEAR coordinates engineering review, manufacturing and inspections for custom or replacement gearboxes. Read more about industrial gearbox replacement, manufacturing facilities and Rubber Calender Gearbox.
Selection Catalogues and Technical Drawings
Download KNGEAR Rubber Processing Machinery Gearbox Catalog (General Reference) (PDF) ↗. It is a general rubber-processing machinery reference; model-specific rated values and dimensional drawings must be confirmed in the quotation.
For a useful first quotation, provide motor kW and RPM, required output RPM, ratio if known, operating duty, nominal and peak output torque, existing gearbox model and dimensional drawings.
Frequently Asked Questions
Is this the same as a multi-roller calender gearbox?
Not necessarily. This page concerns worm-gear transmission layouts; a multi-roll calender may use other gear train types.
Can the worm ratio be changed?
Possible ratios depend on wheel geometry, efficiency, thermal load and available installation space.
What must be checked for continuous-duty worm drive operation?
The design review checks efficiency, heat generation, lubrication, actual running hours, oil temperature limits and the machine’s starting and peak torque. Final gearbox specifications are confirmed from the selected model and operating conditions.
