Drop-Type Rubber Refiner Gearbox
XM-type heavy-duty reduction gearboxes designed for the mechanical loads and drive interfaces of drop-type rubber refiners.
Drop-type refining machinery uses a lower discharge opening and usually works in batches with changing compound resistance. Its reduction gearbox must handle recurring load peaks, motor starts and stable rotor operation. Configuration differs from flip-type machines; output positions and coupling details should be checked for each installation.

Where This Gearbox Is Used
Series and Gearbox Configuration
Relevant product family: XM series drive for drop-type refining equipment. Actual model, housing size, ratio and rated output torque are confirmed from the machine duty and supplier’s final selection drawing.
XM series
Rubber refiner gearbox family represented by KNGEAR product photos and used as a starting point for equipment-specific design review.
Engineered replacement model
A modified or custom gearbox can be reviewed where older machine interfaces or required ratios are no longer standard.

XM Drop-Type Refiner Gearbox Size References
The source catalogue lists XM360, XM400, XM420, XM440, XM450 and XM500 as common XM family reference sizes. XM560 and XM660 also appear in different catalogue editions; availability and detailed construction should be verified against the exact drawing rather than inferred from the size name.
| Reference | Engineering review required |
|---|---|
| XM360 / XM400 / XM420 | Rotor-speed ratio, input arrangement, output center height and installation envelope |
| XM440 / XM450 / XM500 | Continuous/peak torque, rotor shaft configuration, cooling and lubrication |
| XM560 / XM660 | Confirm catalogue edition, exact equipment version and an approved outline drawing |
These numbers are size references, not confirmed ratings for every motor arrangement or duty cycle.
Technical Selection: Power, Speed, Ratio and Torque
These are quotation and selection inputs—not a combined guaranteed rating range for every gearbox. Input motor power (kW), ratio (i), input speed (rpm) and output torque (N·m) must all be checked against the specific machine and duty.
| Technical parameter | Selection basis | RFQ / engineering notes |
|---|---|---|
| Input power (kW) | Matched to the refiner motor and service duty | Provide starts per hour and process batch cycle. |
| Transmission ratio | Determined by motor speed and required refining rotor speed | Confirm speed control and direction of rotation. |
| Output torque | Continuous plus transient torque for compound changes | Separate expected duty from exceptional jam or startup loads. |
| Shaft layout | Match existing rotor drives and couplings | Drawing or accurate measured distances are necessary. |
| Lubrication and heat | Project-specific cooling / oil circulation requirements | Review oil temperature and continuous operating duration. |
Important: Confirm operating and peak loads, orientation, lubrication, ambient conditions and interface drawings before finalizing rated values. No generic figures have been copied from another gearbox series.
Custom Design and Existing Gearbox Replacement
For replacement of a drop-type refiner reducer, provide the XM or current OEM nameplate, general arrangement, motor and operating RPM, rotor arrangement, foundation drawing, output connection dimensions and site photographs. Final selection is confirmed after engineering comparison.
KNGEAR coordinates engineering review, manufacturing and inspections for custom or replacement gearboxes. Read more about industrial gearbox replacement, manufacturing facilities and Rubber Refiner Gearbox Overview.
Selection Catalogues and Technical Drawings
Download KNGEAR Rubber Processing Machinery Gearbox Catalog (PDF) ↗. It is a general rubber-processing machinery reference; model-specific rated values and dimensional drawings must be confirmed in the quotation.
For a useful first quotation, provide motor kW and RPM, required output RPM, ratio if known, operating duty, nominal and peak output torque, existing gearbox model and dimensional drawings.
Frequently Asked Questions
Can a drop-type gearbox replace a flip-type gearbox?
Not based on the name alone. The output shaft geometry, loads and machine mounting can be different.
What is the primary selection parameter?
Check output torque and rotor speed together, then validate motor power, ratio and installation geometry.
Can a gearbox be adapted to old foundation holes?
A retrofit may be possible after confirming center height, bolt pattern and available envelope.
